Get Down! The ReVerie carbon fiber wing for the Exige S2 is a straight bolt on solution that is lighter than stock and provides significantly more down force. This is a Sector111 exclusive. Aggressive Aerodynamic Profile - Designed for ReVerie by aerodynamics writer and designer Simon McBeath, author of Competition Car Aerodynamics.
- The end plate 'notch' increases the wing's efficiency by improving the airflow around the wing tips.
- Thin trailing edge results in less drag and turbulence.
More Down Force = Better Control- Approx. 63% more down force than stock.
- 493N of down force vs. 300N stock (100mph at 12 degrees AoA).
- Data estimated using APUS-CFD software.
Lightweight yet Strong- Pre-Preg, autoclaved dry laid carbon fiber material.
- Only 3.3 lbs in weight, saving 1.97 lbs compared to stock.
- More stable and rigid than stock.
Easy, 5 Minute Install - Kit uses the same four bolts, in the same locations as the stock wing.
- No alterations to your tailgate.
 | Pressure distibution along the wing centerline,
viewed from above. |  | Pressure distibution along the wing centreline,
viewed from below. |  | Pressure distribution along the centerline & over the upper surface of the wing, with velocity vectors plotted.
This configuration incorporates a 5mm Gurney. |
Carbon fiber products are handcrafted, and no two items will be identical. Small imperfections such as wavy weaves, small bubbles, and clear coat blemishes are inevitable. This is a dry laid carbon fiber piece. Clear coating is recommended. | 
