Safe, Comprehensive & Powerful Sector111 is now offering the turn key Secant Engineering developed powertrain swap for the Elise & Exige. This OEM-like package transplants a 2.0 liter Ecotec motor into your Lotus and delivers massive power and reliability. 1 year Warranty Please contact us to schedule your conversion. Track Use Only SECANT Type I Supercharged Engine - Type: Inline, 4 cylinder, Aluminum block and heads
- Displacement: 1998 cc / 122 cu. inch
- Bore and stroke: 86 x 86 mm / 3.39 x 3.39 inch
- Compression Ratio: 9.5:1
- Induction: Supercharged, with Eaton M62 supercharger,
- air to water intercooler
- water to air after-cooler
- Fuel Injection: electronic, sequential, port injection
- Ignition: electronic, coil-on-plug, with knock control
- Valvetrain: dual overhead camshafts with balance shaft
- Sodium-filled exhaust valves and oil spray cooled pistons
- Forged crankshaft with high-strength connecting rods
- SECANT custom oil pan eliminates oil starvation during cornering
Power: 280 hp / 210 kW @ 6600 rpm Torque: 241 lbs-ft / 327 Nm at 4500 rpm Redline: 7000 rpm Max Boost: 17 psi / 1.2 bar Transmission - 5 speed manual gearbox
- Quaife Limited slip differential
- Final Drive Ratio: 4.05
- Engine RPM @ 60 mph: 2400 rpm
Engine Control System - Microprocessor-based engine management
- Electronic boost control
- High-performance engine mapping
- Full OBDII compliant self-diagnostic system
Additional Features - High strength axles
- SECANT custom engine mounts - no drilling required for installation
- OEM catalytic converter selected for low back-pressure
- Active muffler control - low noise on the road, high flow on the track
- Optional severe-duty clutch
- Optional lightweight flywheel
- More custom options available upon request
Mass - SECANT components raise vehicle mass only 14 lbs (6.4 kg) over stock Exige S to 2091 lbs / 949 kg
- Power-to-weight ratio: 267.8 hp/ton vs. 211.8 hp/ton for Exige S, and 191.4 hp/ton for Elise
Contact us to spec out your Secant Conversion - Track Use Only | 
