Prices Starting at: $133.09A User Friendly, yet Street-able Pad! Though CL pads are considered a mild race brakes, the RC5+ compound can be used as aggressive street pad thanks to an innovative sintered, all-metal pad material. Virtually no break-in or bedding procedure, nearly-flat torque curve, low dust & noise and extended life means you get to focus on having fun blasting through the canyons or on the occasional track day! Sintered Metal Material = Hassle-Free & High-Performing - Virtually no break-in or bed-in procedure.
- Only a few moderate stops after install will achieve maximum performance.
- No warm up needed!
- Sintered material has higher coefficient of friction when hot or cold vs competing semi-metallic, organic or ceramic compounds.
- Near maximum bite on a cold morning or after a long highway stint.
- Fade resistant to over 1200 degreesF.
- Almost impossible to achieve in a Lotus/Ariel on or off the track.
- Firm pedal feel and easily modulated.
- High density material will not compress.
- Much less pad transfer than other pads
- Thin graphite transfer layer is consistent, repeatable and self-cleaning.
- No vibrations, judder or rotor damage.
- High metal content is extremely wear resistant.
- Low to moderate noise.
- Moderate dust.
Model Compatibility & Order Guide - Std Brakes = '05+ Elise & SC, '06-'07 Exige & 'S'
- Atom Alcons = Ariel Atom Alcon Race Brakes
Price is per axle set *If you wash your car with these pads installed, dry them off by driving around the block a few times to heat them up. Moisture left on these pads may cause them to rust to the rotors which could result in separation from the backing plate. | 
